Cd Method (Alternate Method) - Stratasys Fortus 360mc User Manual

CD Method (alternate method)

This method is for customers who do not have web access. The Controller
Software Update CD containing the updated .upg file and must be obtained from
Stratasys. Inc.
1.
Insert the Controller Software Update CD into the workstation computer.
2.
Make sure the system is placed in the receive software upgrade mode. (See
"Placing System in Receive Software Upgrade Mode" on page
3.
Open the Control Center application and select the Services tab and then click
Update Software. (See
4.
Browse to the location of the .upg upgrade file on the Controller Software
Update CD.
5.
Select the .upg file to be downloaded and then press Open. This will send the
file to the Fortus 360mc/400mc.
6.
When the download is complete, select Reboot and Install Software Upgrade
and then press OK at the Fortus 360mc/400mc system.
7.
After the system reboots and the upgrade installation complete, two options
will appear; select Auto Home XYZ.
Figure 7-1: Control Center
Figure 7-1)
7-2
7-3.)