Stratasys Fortus 360mc User Manual page 2

LIABILITY STATEMENT
The information in this document is subject to change without notice. Stratasys, Inc. shall not be
liable for errors contained herein or for incidental or consequential damages in connection
with the furnishing, performance, or use of this material.
Stratasys, Inc. makes no warranty of any kind with regard to this material, including, but not
limited to, the implied warranties of merchantability and fitness for a particular purpose. It is the
responsibility of the system owner/material buyer to determine that the Stratasys material is safe,
lawful, and technically suitable for the intended application as well as identify the proper disposal (or
recycling) method consistent with local environmental regulations. Except as provided in Stratasys'
standard conditions of sale, Stratasys shall not be responsible for any loss resulting from any use of its
products described herein.
COPYRIGHT STATEMENT
This document is protected by copyright. All rights reserved. Its use, disclosure, and possession are
restricted by an agreement with Stratasys per software copyright. No part of this document may be
photocopied, reproduced or translated into another language without the prior written consent of Stratasys,
Inc.
All drawings and information herein are the property of Stratasys Inc. All unauthorized use and reproduction
is prohibited.
TRADEMARK ACKNOWLEDGMENTS
Stratasys, Insight, WaterWorks, and FORTUS are registered trademarks of Stratasys, Inc.
FORTUS 360mc, FORTUS 400mc, and FORTUS 900mc are trademarks and service marks of Stratasys
Inc. in the United States and other countries.
FDM 360mc and FDM 400mc are registered trademarks and service marks of Stratasys Inc. in the United
States and other countries.
Windows NT, Windows 2000, and Windows XP are registered trademarks of Microsoft Corporation.
Ultem* 9085 is a trademark of SABIC Innovative Plastics IP BV.
© Copyright 2015 Stratasys, Inc.
The FORTUS 360mc/400mc and FDM 360mc/400mc systems conform with the following standards, in accordance with the EU Machinery, Low Voltage and
Electromagnetic Compatibility Directives: EU 2006/42/EC
EU 2006/95/EC
EU 2004/108/EC
ii