Stratasys Fortus 360mc User Manual page 95

B. Select
Administration
C. Select
Receive Software Upgrade or Code
The system is now ready to receive the new software upgrade or code from the Insight
workstation.
3. From the Insight workstation:
A. Open the Insight FDM CC application.
B. From the Name: drop-down list, select your the 360mc/400mc machine.
i.
Access the Services Tab.
•
From FDM CC: click the Services Tab.
C. Use the appropriate button ('Update Software', 'Setup Code') to upload the change to the
modeler.
D. If updating software, navigate to the location of the upgrade file.
•
If using CD, upgrade files (UPG) are found in the CD directory.
•
If downloaded from the Internet, upgrade files are located in the 'Stratasys' folder on the workstation.
E. Select and confirm the UPG file to upload.
i.
When the upload is complete, from the modeler, select "Reboot and Install Software Upgrade <E>" and
press ENTER.
Note: To cancel the upgrade, press ESCAPE on your keyboard.
F. The system applies the change and reboots.
•
The system is now in its normal power up state.
•
Log files and calibration files are preserved by the upgrade installation process.
and press ENTER.
Modeler Default..
>Administration..
Reboot system..
Network Configuration..
>Receive Software Upgrade or Code..<E>
Field Service.. password:
>Waiting for Software Upgrade or Code
Press MENU key to Cancel
and press ENTER.
85