Using The Keypad - Stratasys Fortus 360mc User Manual

USING THE KEYPAD

The Operator Control Panel has the following keypad buttons
Figure 4-2: Keypad Buttons
Button Description
MENU Takes you up one level in the menu directory, unless stated otherwise. It is also
used to take you out of the Help system.
Up Arrow Moves the cursor up one line in the display each time it is pressed.
Down Arrow Moves the cursor down one line in the display each time it is pressed.
ENTER Activates the selection indicated on the display.
ESCAPE Takes you back to the Main Menu, unless stated otherwise.
LIGHT Toggles the Oven Light ON and OFF.
PAUSE Pauses the current build job. To Pause, hold button in for 2-3 seconds. Use the
Resume Build command to resume build.
HELP Displays Help information for the current menu.
Dot <.> Shows details of the current job selected in the queue. Available only when job
queue is being viewed. (When in detail view, use arrow keys to display other jobs in
queue.)
Toggles between all sample jobs and only jobs for the current system configuration.
DEL Deletes entered characters, jobs in the job queue, and jobs in the sample queue.
1 - 9 In addition to entering the numbers 1 through 9, the number keys perform the
following actions:
1 Moves a job to the top of the queue. Available only when job queue is being
viewed.
2, 4, 6, 8 Move the axes:<4> (X left), <6> (X right)
<2> (Y back), <8> (Y front).
3, 9 Move the Z stage: <3> (Z up), <9> (Z down).
9 Copies the selected job to the sample queue. Available only when job queue is
being viewed.
(Figure 4-2):
30