Stratasys Fortus 360mc User Manual page 103

Locate Part Start..
Demo Bounding Box <E>
>Load and Calibrate..
* Waiting h:mm to stabilize
** Actual 100°C Setpoint: 225°C
>Unlock Door <E> | Vacuum On
Calibrate Immediately <E>
* Tip to Tip Calibration Activity
Please Wait...
*Job: Calibration Job
*Build Time: 0:04 hr of 0:08 hr
*PC 0.1 in3 PC_S
>Modeler Status.. 0.010 of 0.050 in
3 - Calibrate..
>Set Z Stage Zero..
AutoCal Tips <E>
Tip Offset Value..
AutoHome XYZ <E>
4 - Set Z Stage Zero..
>Set Manual Z Stage Zero<E>..
Modify Current Z Zero..
Auto Z Zero Calibrate <E>
6 - Select Calibration Part Position..
(if user placement on)
6 - The following screens display automatically:
(Building)
0.0
| Calibration Job <E>
93
*