Stratasys Fortus 360mc User Manual page 4

AVAILABLE OPTIONS
Available Options
ABSi Material Option/Upgrade
ABS-M30 Material Option/Upgrade
ABS-M30i Material Option/Upgrade
ABS-ESD7
ASA Material Option/Upgrade
Nylon 12 Material Option/Upgrade
PC-ABS Material Option/Upgrade
PC Material Option/Upgrade
PC-ISO Material Option/Upgrade
Ultem* 9085 Material Option/Upgrade
Ultem 1010 Material Option/Upgrade
PPSF Material Option/Upgrade
Large Envelope Option/Upgrade:
Envelope upgrade to 16x14x16 inch (406x355x406 mm)
Adds one (1) additional model material bay
Adds one (1) additional support material bay
Adds Material Auto-Changeover
ABOUT THIS GUIDE
This guide is your introduction to building prototypes using a Stratasys rapid prototype system. It is designed
as a learning and reference tool that explains system operation in an easy to understand, step-by-step,
process.
HOW TO USE THIS GUIDE
This guide is divided into easy-to-follow chapters. The tabs allow you to quickly and easily find the
information you want. You can read this user guide chapter by chapter or use the tabs, Table of Contents
when you need to quickly find specific information. Keeping this user guide close to your system will
efficiently allow you to troubleshoot and maintain the system.
CONVENTIONS USED IN THIS GUIDE
The following conventions are used in this guide.
When you see text in
•
Panel Screen. For example, select
• If you see text in BOLD CAPS it indicates that this is a key located on the Operator Panel keypad.
For example, From the Main Menu select
If you see boxed blue text, it indicates that this information is being shown on the Operator Panel
•
Screen. For example:
, it indicates a menu item that can be selected from the Operator
this font
Build Last Job
Build Job
Build Job..
>Operator Control..
Modeler Status..
Maintenance..
360mc 400mc
X
X X
X
X
X X
X X
X X
X X
X
X
X
X
X X
.
and press ENTER.
|*Tips: Model T16
|* Support T16
iv