Stratasys Fortus 360mc User Manual page 104

5 - Set Manual Z Stage Zero..
*Positioning.
Unlock Door <E>
Set Distance= 0.100 in <E>
>Set Z Stage= 0 <E>
*Move Z Stage: +Z<9> -Z<3>
5 - Modify Current Z Zero..
* Modify Current Z Zero
>+ 0.00 <E>
- 0.00 <E>
4 - Tip Offset Value..
*Delta X:0.0000 Y:0.0000 Z:0.0000
>-X 0.00 <E> | +X 0.00<E>
-Y 0.00 <E> | +Y 0.00<E>
-Z 0.00 <E> | +Z 0.00<E>
3 - Temp Control..
Set Oven to Build Temp: 145°C <E>
Cool Down Oven to:
>Auto Cool Oven:
3 - Move Head/Stage..
Move Head to Service Location <E>
Move Head to Center-Front Location<E>
Move Z Stage to Bottom <E>
>Move Relative..
4 - Move Relative..
>Set Distance= 0.100 in <E>
*Move Head: +X <6> -X<4> +Y <2> -Y <8>
*Move Z Stage: +Z <9> -Z <3>
*Current: X: 0.000 Y: 0.000 Z: 0.000
Please Wait...
(Z: 0.010)
Z: 16.250
85°C <E>
OFF <E>
94