Dsr - Polycom ViewStation EX Api Manual

dsr

© Polycom, Inc.
Description
This command lets you configure the dsr serial interface control signal (data
set ready). The default setting for this signal is "normal" .
Syntax
dsr <normal|inverted|get>
Parameter Definition
normal Sets the signal to normal (high voltage is logic 1).
inverted Sets the signal to inverted (low voltage is logic 1).
get Returns the current setting (normal or inverted).
Example
dsr get
User Interface Screen Location
System Info > Admin Setup > Video Network > Advanced V.35: DSR
V.35/RS-449/RS-530 Commands
263