Usegatekeeper - Polycom ViewStation EX Api Manual

API Guide for ViewStation EX, ViewStation FX, and VS4000

usegatekeeper

214
Description
This command sets or gets the gatekeeper mode (off, specify, or auto). After
a change, the user is prompted for system restart.
Note A gatekeeper is not required to make IP-to-IP LAN calls. In these
situations, select the off option.
Syntax
usegatekeeper <off|specify|auto|get>
Parameter Definition
off Select this option if no gatekeeper is required or if you
make IP-to-IP LAN calls.
specify Specifies a gatekeeper.
If this option is selected, you must enter the gatekeeper
IP address or name using the command
on page 78.
auto Sets the system to automatically find an available
gatekeeper.
get Returns the current setting (off, specify, or auto).
Example
usegatekeeper specify
User Interface Screen Location
System Info > Admin Setup > LAN/H.323 > H.323 > Gatekeeper: Use
Gatekeeper
gatekeeperip
www.polycom.com/videodocumentation