Enhanced Commands - Polycom ViewStation EX Api Manual

Enhanced Commands

© Polycom, Inc.
Command
ntpmode
ntpserver
phone
popup
speeddial
sysinfo
systemhastelephone
vcstream
vcfxvgacontentpreview
The following table lists the commands that have been enhanced in
Release 6.0.
Command
abk
dial addressbook
gabk
gendialtone
hires
Action
Sets or gets whether an NTP time server is
used and, if so, whether it is selected
manually or automatically.
Lets you set or get an NTP time server, using
its IP address or DNS name.
Either switches the phone channel to the next
channel to add another telephone call to a
video call, or clears any dialstring from the
text box on the Telephone screen of the user
interface
Registers or unregisters the shell session to
receive popup notifications.
Lists the current Speed Dial entries, or locks
and unlocks a specified Speed Dial entry.
Registers or unregisters the shell session to
receive ISDN, IP , and gatekeeper status
notifications.
Set whether or not the system has a POTS
line connected.
Gets the current status of the Visual Concert
stream, or registers or unregisters state
changes to the stream.
Sets or gets the ability to preview content on
the near Visual Concert FX monitor.
Enhancement
New parameters to specify searches in the
local Address Book.
New IP and ISDN parameters to filter for one
or the other call type.
New parameters to specify searches in the
Global Address Book.
Generates DTMF dialing tones to a POTS line
while in a video call. This command is
identical to the gendial command of the
previous release.
Now has subcommand values {1..4} for
camera selection.
Introduction
3