Diffserv - Polycom ViewStation EX Api Manual

diffserv

© Polycom, Inc.
Description
This command lets you set or get a DiffServ priority level for the Type of
Service (Quality of Service).
Syntax
diffserv <set|get> <{0..63}>
Parameter Definition
set Sets the priority level.
A priority level from the range {0..63} is required.
get Returns the current setting.
{0..63} Range of available priorities.
Example
diffserv set 0
User Interface Screen Location
System Info > Admin Setup > LAN/H.323 > QOS: Type of Service (ToS)
Field > DiffServ
System Commands
53