Isdnareacode - Polycom ViewStation EX Api Manual

API Guide for ViewStation EX, ViewStation FX, and VS4000

isdnareacode

238
Description
This command sets or gets the ISDN area code or STD code associated with
the area where the system is used.
Syntax
isdnareacode <set|get> ["area code"]
Parameter Definition
set Sets the ISDN area code when followed by the "area
code" parameter.
To erase the current setting, omit "area code" .
get Returns the area code information.
"area code" Numeric value.
Example
isdnareacode set 512
User Interface Screen Location
System Info > Admin Setup > Video Network > ISDN Network: ISDN VIdeo
Numbers > Area Code
Note This screen is only accessible if you have a Quad BRI network
interface connected to your system.
www.polycom.com/videodocumentation