Mpmode - Polycom ViewStation EX Api Manual

mpmode

© Polycom, Inc.
Description
This command sets or gets the multipoint conference viewing mode for the
system in a multipoint call. The multipoint mode can be set to auto,
discussion, presentation, or fullscreen. By default, it is set to auto.
Note This command is not available on the ViewStation EX unless you
purchase the multipoint option.
Syntax
mpmode <auto|discussion|presentation|fullscreen|get>
Parameter Definition
auto In Auto mode, the system switches between Full Screen
Mode and Discussion mode, depending on the
interaction between the sites. If one site is talking
uninterrupted for 15 seconds or more, the speaker
appears full screen.
presentation In Presentation mode, the person who is speaking
appears full screen to the far sites, while the person
who is speaking sees all the other sites on a split screen.
discussion In Discussion mode (also called Continuous Presence
mode), every site sees all the sites in the meeting at the
same time, on a split screen.
fullscreen In Full Screen mode, every site in the call sees the
current speaker, or the latest person to speak, on the full
screen.
get Returns the current setting for this option.
Example
mpmode discussion
User Interface Screen Location
System Info > User Setup: Multipoint Mode
System Commands
131