Mcupassword - Polycom ViewStation EX Api Manual

API Guide for ViewStation EX, ViewStation FX, and VS4000

mcupassword

128
Description
This command sends the MCU password when the MCU prompts system for
an MCU password. The Meeting Password can be configured as the
multipoint MCU conference password.
Note This command is not available on the ViewStation EX unless you
purchase the multipoint option.
Syntax
mcupassword ["password"]
Parameter Definition
"
password" Alphanumeric string. Valid characters are: 0-9, a-z
(lower and upper case), -, _, @, /, ;, ,, ., \.
To erase the current setting, omit the parameter.
Note: If the password string includes spaces, enclose it
in quotation marks.
Examples
mcupassword vs4000MPpasswd
This command sends the MCU password vs4000MPpasswd to the MCU.
mcupassword
This command erases the current MCU password if one has been set. If none
has been set, mcupassword <empty> is returned.
User Interface Screen Location
System Info > Admin Setup > Security: Meeting Password
www.polycom.com/videodocumentation