Dhcp - Polycom ViewStation EX Api Manual

dhcp

© Polycom, Inc.
Description
This command is used to select or get DHCP options. After changing the
DHCP settings, you will be prompted to restart the system. If you or the
administrator has chosen not to allow the DHCP server option, it will not be
available.
After a change is made, the system prompts you for a restart.
Syntax
dhcp <off|client|server|get>
Parameter Definition
off Disables DHCP .
client Enables DHCP client. The system is set to obtain an IP
address from a server on your network.
server Enables DHCP server. The system is set to provide IP
addresses to the other computers on your network.
get Returns the selected DHCP option (off, client, or server).
Example
dhcp client
User Interface Screen Location
System Info > Admin Setup > LAN/H.323 > LAN/Intranet > LAN & Intranet:
DHCP
System Commands
49