Cts - Polycom ViewStation EX Api Manual

API Guide for ViewStation EX, ViewStation FX, and VS4000

cts

260
Description
This command lets you configure the cts serial interface control signal (clear
to send). The default setting for this signal is "normal" .
Syntax
cts <normal|inverted|get>
Parameter Definition
normal Sets the signal to normal (high voltage is logic 1).
inverted Sets the signal to inverted (low voltage is logic 1).
get Returns the current setting (normal or inverted).
Example
cts normal
User Interface Screen Location
System Info > Admin Setup > Video Network > Advanced V.35: CTS
www.polycom.com/videodocumentation