Callencryption - Polycom ViewStation EX Api Manual

API Guide for ViewStation EX, ViewStation FX, and VS4000

callencryption

32
Description
This command sets or gets the encryption mode. Use encryption when the
far site is capable of encryption.
Syntax
callencryption <required|disabled|get>
Parameter Definition
required Sets call encryption to be used for every call when it is
available.
disabled Disables call encryption.
get Returns the current setting (required or disabled).
Example
callencryption required
User Interface Screen Location
System Info > Admin Setup > Security > Encryption
Note The Encryption options are only visible on the user interface if an
encryption key has been entered.
www.polycom.com/videodocumentation