Mute - Polycom ViewStation EX Api Manual

API Guide for ViewStation EX, ViewStation FX, and VS4000

mute

132
Description
This command sets or gets the near or far site mute mode. It can also set the
system to register or unregister mode. In register mode, the system sends
notification to the shell session when the far or near site is muted or
unmuted.
Syntax
mute <register|unregister|near|far>
mute near|far <on|off|toggle|get>
Parameter Definition
register Registers the system to give notification when the mute
mode changes.
unregister Disables register mode.
near Sets the command for the near site. It requires one of
the following parameters:
• on
• off
• toggle
• get
mute <near|far> Definition
Parameter
on Turns on the mute mode for the near site (mute near).
off Turns off the mute mode for the near site (mute near).
toggle If in mute near on mode, switches to the other mode
setting (mute near off) and vice versa.
get Returns the current setting for the near or far site (mute
near|far get).
Example
mute near on
www.polycom.com/videodocumentation