Autoanswer - Polycom ViewStation EX Api Manual

autoanswer

© Polycom, Inc.
Description
This command sets or gets the Auto Answer Point to Point mode which
determines how the system will handle an incoming call in a point-to-point
video conference.
Syntax
autoanswer <yes|no|donotdisturb|get>
Parameter Definition
yes Allows any incoming call to be connected automatically.
This is the factory default autoanswer setting.
no Prompts the user to answer incoming calls with a
message, "You have a video call. Would you like to
answer?" This message can be followed by a far site
video number and a far-site name if they are available.
If the user selects yes, the call will be answered. If the
user selects no, the call will be rejected. The factory
default is set to yes.
donotdisturb Notifies the user of incoming calls but does not connect
them. The site which placed the call receives a Far Site
Busy code (H.320) or Call Rejected (H.323).
get Returns the status of the option (yes, no, or
donotdisturb).
Example
autoanswer donotdisturb
User Interface Screen Location
System Info > Admin Setup > General Setup: Auto Answer Point to Point
System Commands
25