Mpautoanswer - Polycom ViewStation EX Api Manual

API Guide for ViewStation EX, ViewStation FX, and VS4000

mpautoanswer

130
Description
This command sets or gets the Auto Answer Multipoint mode which
determines how the system handles an incoming call in a multipoint video
conference.
Note This command is not available on the ViewStation EX unless you
purchase the multipoint option.
Syntax
mpautoanswer <yes|no|donotdisturb|get>
Parameter Definition
yes Connects incoming calls automatically. The screen will
split into a multipoint call progress screen as the
incoming call is answered.
no User Interface: For an incoming call, the user will be
notified and given the choice to answer the call. This
message can be followed by a far-site video number and
name if they are available. If the user selects Yes, the call
is added into the ongoing conference. If the user selects
No, the call is rejected. The factory default is set to No.
API: For an incoming call, if mpautoanswer is set to No
and the listen video command returns the string
"listen video ringing" in the session.
donotdisturb You are not notified of incoming calls. Sites placing calls
to the system receive a Far Site Busy code (H.320) or
Call Rejected (H.323).
get Returns the current setting (yes, no, or donotdisturb).
Example
mpautoanswer donotdisturb
User Interface Screen Location
System Info > Admin Setup > General Setup: Auto Answer Multipoint
OR
System Info > User Setup: Auto Answer Multipoint
www.polycom.com/videodocumentation