Spidnum - Polycom ViewStation EX Api Manual

API Guide for ViewStation EX, ViewStation FX, and VS4000

spidnum

256
Description
This command sets or gets the ISDN SPID number or numbers assigned to
the system. SPIDs generally apply only in the U.S. and Canada. If you are
behind an internal phone system (PBX), SPID numbers may not be required.
Syntax
spidnum <set|get> <"bchannel">
spidnum set <"bchannel"> ["number"]
spidnum get <"bchannel"|all>
Parameter Definition
set Sets the SPID number for a B channel line when
followed by the "number" parameter.
To erase the current setting, omit "number" .
get Returns the current SPID number associated with a B
channel of a particular line.
"bchannel" The line and B channel. Valid values are:
• 1b1BRI line 1, B channel 1
• 1b2BRI line 1, B channel 2
• 2b1BRI line 2, B channel 1
• 2b2BRI line 2, B channel 2
• 3b1BRI line 3, B channel 1
• 3b2BRI line 3, B channel 2
• 4b1BRI line 4, B channel 1
• 4b2BRI line 4, B channel 2
"number" Numeric string. SPID numbers are generally provided
by your network service provider.
all Returns SPIDs for all channels of all lines.
Example
spidnum set 1b1 5125551212
www.polycom.com/videodocumentation