Screen - Polycom ViewStation EX Api Manual

API Guide for ViewStation EX, ViewStation FX, and VS4000

screen

162
Description
This command causes a specified screen to be displayed on the system.
Syntax
screen <addressbook|farvideo|main|nearvideo|sysinfo|speeddial|
disableui|enableui|chaircontrol|sleep|wake|phone>
Parameter Definition
addressbook Goes to the Address Book screen.
speeddial Goes to the Speed Dial screen.
farvideo Goes to the far-site video screen (when in a call).
main Goes to the main user interface screen.
nearvideo Goes to the near-site video screen.
sysinfo Goes to the System Information screen.
disableui Turns off the user interface, leaving the screen
completely blank. This command is retained after a
restart. Use the enableui command to access the user
interface screens again.
enableui Turns on the user interface.
chaircontrol Goes to the main Chair Control screen.
sleep Causes the system to go into sleep mode.
wake Wakes up the system from sleep mode.
phone Goes to the Telephone screen where you can dial or
disconnect a telephone call.
Example
screen sysinfo
www.polycom.com/videodocumentation