Camera4Ptz - Polycom ViewStation EX Api Manual

camera4ptz

© Polycom, Inc.
Description
This command sets camera source 4 to pan-tilt-zoom mode.
Note This command is specific to the VS4000 system.
Note See the command
camera source to S-video or composite mode.
Syntax
camera4ptz <yes|no|get>
Parameter Definition
yes Enables pan-tilt-zoom mode.
no Disables pan-tilt-zoom mode.
get Returns the current setting (yes or no).
Example
camera4ptz get
User Interface Screen Location
System Info > Admin Setup > Video/Camera > Cameras > VS4000 Camera
Setup
camerainput on page 41 to set your VS4000
System Commands
39