Pricsu - Polycom ViewStation EX Api Manual

pricsu

© Polycom, Inc.
Description
This command sets or gets the PRI CSU mode for a T1 interface. By default,
the T1 PRI network interface module is set for internal CSU mode.
Syntax
pricsu <internal|external|get>
Parameter Definition
internal Sets the internal CSU mode. This is the default.
external Sets the external CSU mode. When selected, you must
specify the PRI line buildout. (See
page 250.)
get Returns the current CSU setting (internal or external).
Example
pricsu external
User Interface Screen Location
System Info > Admin Setup > Video Network > IMUX > PRI Network > PRI
Setup: CSU
Note This screen is only accessible if you have a PRI network interface
connected to your system.
ISDN Commands
prilinebuildout on
247