Roomphonenumber - Polycom ViewStation EX Api Manual

roomphonenumber

© Polycom, Inc.
Description
This command sets or gets the number of the phone that is located in the
same room as the system.
Syntax
roomphonenumber <set|get> ["number"]
Parameter Definition
set Sets the room phone number when followed by the
"number" parameter.
To erase the current setting, omit the parameter.
get Returns the current setting.
"number" Telephone number for a telephone (not the system) in
the room.
Note: Enclose the number in quotation marks if it
includes spaces. Example: 512 555 1212
Example
roomphonenumber "512 5551212"
User Interface Screen Location
System Info > Admin Setup > Phone/Audio: Room Phone Number
System Commands
159