Dcdfilter - Polycom ViewStation EX Api Manual

API Guide for ViewStation EX, ViewStation FX, and VS4000

dcdfilter

262
Description
This command lets you configure the filter of the dcd serial interface control
signal (data carrier detect). When this filter is enabled, dcd drops for 60
seconds before changing the call state. The default setting for this signal is
"off" .
Syntax
dcdfilter <on|off|get>
Parameter Definition
on Enables the dcd filter.
off Disables the dcd filter.
get Returns the current setting (on or off).
Example
dcdfilter on
User Interface Screen Location
System Info > Admin Setup > Video Network > Advanced V.35: DCD > Filter
www.polycom.com/videodocumentation