Ipdialspeed - Polycom ViewStation EX Api Manual

ipdialspeed

© Polycom, Inc.
Description
This command sets or gets the IP dialing speed valid speed, and enables or
disables a specified speed.
Syntax
ipdialspeed <set|get> <"valid speed"> <on|off>
Parameter Definition
set Sets the IP dialing speed. The parameters "valid speed"
and on or off are required.
get Returns the current setting (on or off). The parameter
valid speed is required.
"valid speed" Valid speeds are: 56, 64, 2x56, 112, 2x64, 128, 168, 192,
224, 256, 280, 320, 33 6, 384, 392, 7x64, 8x56, 504, 512,
560, 576, 616, 640, 672, 704, 728, 768, 784, 832, 840,
16x56, 14x64, 952, 960, 1008, 1024, 1064, 1088, 1120,
1152, 1176, 1216, 1232, 1280, 1288, 24x56, 21x64, 1400,
1408, 1456, 1472, 1512, 1536, 1568, 1600, 1624, 1664,
1680, 1728, 1736, 32x56, 28x64, 1848, 1856, 1904, and
1920 Kbps.
Note: The ViewStation EX system supports speeds up
to 768 Kbps.
on Enables the specified speed.
off Disables the specified speed.
Example
ipdialspeed get 168
returns
ipdialspeed 168 off
User Interface Screen Location
System Info > Admin Setup > LAN/H.323 > H.323 > Dialing Speeds
System Commands
113