Priareacode - Polycom ViewStation EX Api Manual

priareacode

© Polycom, Inc.
Description
This command sets or gets the PRI area code.
Syntax
priareacode <set|get> ["area code"]
Parameter Definition
set Sets the PRI area code when followed by the "area
code" parameter.
To erase the current setting, omit "area code" .
get Returns the current setting.
"area code" Numeric string specifying the area code.
Example
priareacode set 512
User Interface Screen Location
System Info > User Setup > Video Network > IMUX > Numbers
Note This screen is only accessible if you have a PRI network interface
connected to your system.
ISDN Commands
243