Gatewayprefix - Polycom ViewStation EX Api Manual

API Guide for ViewStation EX, ViewStation FX, and VS4000

gatewayprefix

84
Description
This command sets the gateway prefixes for the corresponding speeds.
Some gateways require a number to be prepended (prefix) to the gateway
number. The prefix identifies which gateway is used to dial a call at a
particular data rate.
Syntax
gatewayprefix <set|get> <"valid speed"> ["value"]
Parameter Definition
set Sets the gateway prefix when followed by the "value"
parameter.
To erase the current setting, omit the value.
get When followed by the "valid speed" parameter, returns
the current value for this speed.
"valid speed" Valid speeds are: 56, 64, 2x56, 112, 2x64, 128, 168, 192,
224, 256, 280, 320, 336, 384, 392, 7x64, 8x56, 504, 512,
560, 576, 616, 640, 672, 704, 728, 768, 784, 832, 840,
16x56, 14x64, 952, 960, 1008, 1024, 1064, 1088, 1120,
1152, 1176, 1216, 1232, 1280, 1288, 24x56, 21x64, 1400,
1408, 1456, 1472, 1512, 1536, 1568, 1600, 1624, 1664,
1680, 1728, 1736, 32x56, 28x64, 1848, 1856, 1904, and
1920 Kbps.
Note: The ViewStation EX system supports speeds up
to 768 Kbps.
"value" Prefix (code) used for a particular call speed. Consult
your gateway instruction manual to determine which
codes are appropriate.
Example
gatewayprefix set 168 90
User Interface Screen Location
System Info > Admin Setup > LAN/H.323 > H.323 > Gateway (page 2): Prefix
www.polycom.com/videodocumentation