H331Videoprotocol - Polycom ViewStation EX Api Manual

h331videoprotocol

© Polycom, Inc.
Description
This command sets or gets the H.331 video protocol for the broadcast
transmission. Broadcast configuration parameters should be set to
accommodate the lowest common denominator of the systems which are
receiving the broadcast.
Syntax
h331videoprotocol <|h263|h261|get>
Parameter Definition
h263 Video protocol based on an enhanced video algorithm.
Only far-site systems that support H.263 can receive
H.263.
h261 Standard video protocol used to transmit video.
get Returns the current setting.
Example
h331videoprotocol h263
User Interface Screen Location
System Info > Admin Setup > Video Network > Video Network >
Broadcast Mode Setup: Video Protocol
V.35/RS-449/RS-530 Commands
269