Streammulticastip - Polycom ViewStation EX Api Manual

API Guide for ViewStation EX, ViewStation FX, and VS4000

streammulticastip

186
Description
This command sets or gets the multicast IP address. A default address is
entered for you based on your system's serial number. This ensures that you
do not have the same multicast address as another Polycom system. You can
change this default address using this command.
Syntax
streammulticastip <set|get> ["ipaddress"]
Parameter Definition
set Sets the multicast IP address when followed by the
"ipaddress" parameter.
To erase the current setting, omit the parameter.
get Returns the current setting.
"ipaddress" Multicast IP address.
Example
streammulticastip get
User Interface Screen Location
System Info > Admin Setup > LAN/H.323 > Streaming: IP MulC:\Documents
and Settings\jzarboulas\My Documents\Docs Stuffticast Address
www.polycom.com/videodocumentation