Ntpserver - Polycom ViewStation EX Api Manual

API Guide for ViewStation EX, ViewStation FX, and VS4000

ntpserver

138
Description
This command sets or gets an Network Time Protocol (NTP) server, using the
IP address or the DNS name of the server. This allows you to use an internal
time server and thus synchronize the system's time with the time on your
internal network. The system uses this time only for the local Call Detail
Report.
Syntax
ntpip <set|get> <"DNS name or ipaddress">
Parameter Definition
set Sets the IP address of the NTP server when followed by
a valid parameter.
get Gets the IP address of the NTP server.
"DNS name or The DNS name or IP address of the NTP server.
ipaddress"
Example
ntpserver set time.xyzcorp.com
User Interface Screen Location
System > Admin Setup > LAN/H.323 > LAN & Intranet > NTP Setup
www.polycom.com/videodocumentation