Telenumber - Polycom ViewStation EX Api Manual

telenumber

© Polycom, Inc.
Description
This command sets or gets the system's telephone number.
Syntax
telenumber <set|get> ["telephone number"]
Parameter Definition
set Sets the telephone number when followed by the
"telephone number" parameter.
To erase the current setting, omit the parameter.
get Returns the current setting.
"telephone System's telephone number.
number"
Note: Enclose the string in quotation marks if it includes
spaces. Example: "512 555 1212"
Example
telenumber set 5551212
User Interface Screen Location
System Info > Admin Setup > Phone/Audio: Number
System Commands
201