Prilinebuildout - Polycom ViewStation EX Api Manual

API Guide for ViewStation EX, ViewStation FX, and VS4000

prilinebuildout

250
Description
This command sets or gets the PRI line buildout for a T1 interface. If you are
using an internal CSU, enter the output attenuation in dB. If you are using an
external CSU, enter the output attenuation in feet.
Syntax
prilinebuildout <set|get> <"attenuation in dB"|"attenuation in feet">
Parameter Definition
set Sets the PRI line buildout. It requires an output
"attentuation in dB" or an "attenuation in feet" .
get Returns the current setting.
"attenuation in Output attenuation values in dB. For internal CSUs.
dB" Available values are
• 0
• -7.5
• -15
• -22.5
"attenuation in Output attenuation values in feet. For external CSUs.
feet" Available values are:
• 0-133
• 134-266
• 267-399
• 400-533
• 534-665
Example
prilinebuildout set -7.5
User Interface Screen Location
System Info > Admin Setup > Video Network > IMUX > PRI Network >
PRI Setup: Line Buildout
Note This screen is only accessible if you have a PRI network interface
connected to your system.
www.polycom.com/videodocumentation