Telecountrycode - Polycom ViewStation EX Api Manual

API Guide for ViewStation EX, ViewStation FX, and VS4000

telecountrycode

200
Description
This command sets or gets the system's telephone country code. This code is
associated with the country where the system is used. The system is
generally able to automatically determine the country code based on the
country you selected during initial system setup.
Syntax
telecountrycode <set|get> ["telephone country code"]
Parameter Definition
set Sets the telephone country code when followed by the
"telephone country code" parameter.
To erase the current setting, omit the parameter.
get Returns the country code information.
"telephone Numeric value. This code is the same as the ISDN
country code" country code.
Example
telecountrycode set 33
User Interface Screen Location
System Info > Admin Setup > Phone/Audio: Country Code
www.polycom.com/videodocumentation