Ntpmode - Polycom ViewStation EX Api Manual

ntpmode

© Polycom, Inc.
Description
This command sets or gets the mode of the system's Network Time Protocol
(NTP) server. NTP server time is used to ensure synchronized time data in the
local Call Detail Report.
Note The ViewStation does not have a system time. If you do not use an
NTP server with the system, the ViewStation only keeps the number
of seconds since the last startup.
Syntax
ntpmode <auto|off|manual|get>
Parameter Definition
auto Automatically selects an NTP server from the Internet.
off Turns off the use of an NTP server.
manual Lets you specify a server using the command
described on page 138.
get Returns the current time server mode.
Example
ntpmode auto
User Interface Screen Location
System > Admin Setup > LAN/H.323 > LAN & Intranet > NTP Setup
System Commands
ntpserver
137