Prinumberingplan - Polycom ViewStation EX Api Manual

prinumberingplan

© Polycom, Inc.
Description
This command sets or gets the PRI numbering plan.
Syntax
prinumberingplan <isdn|unknown|get>
Parameter Definition
isdn With this parameter, the numbering plan is identified to
the upstream switch as ISDN, and the number type,
which is either national or international, is determined
from the dialed phone number. If the dialed phone
number starts with the international dialing prefix that
is currently selected, the type is set to the international
and the prefix is removed from the number before the
number is sent to the upstream switch. Otherwise, the
number is marked as national and passed to the
upstream switch without modification.
unknown This is the default selection. With this parameter, the
numbering plan and number type are sent to the
upstream as unknown, and the dialed phone number is
sent without notification. The "unknown" parameter is
preferred and should work with all properly configured
PBXs and with most telephone company switches. A
notable exception in North America is an ATT 5ESS
switch, which is provisioned with Accunet, or an ATT
4ESS switch. For these switches, set the numbering type
to ISDN.
get Returns the current setting.
Example
prinumberingplan isdn
User Interface Screen Location
System Info > Admin Setup > Video Network > IMUX > PRI network >
PRI Setup > Advanced PRI Setup
Note This screen is only accessible if you have a PRI network interface
connected to your system.
ISDN Commands
253