Pridialchannels - Polycom ViewStation EX Api Manual

API Guide for ViewStation EX, ViewStation FX, and VS4000

pridialchannels

248
Description
This command sets or gets the number of PRI channels to dial in parallel. By
default, ISDN channels are dialed three at a time. On PRI systems, you can
choose the number of channels to dial in parallel.
Syntax
pridialchannels <set|get> <{1..12|1..15}>
Parameter Definition
set Sets the number of PRI channels to be dialed in parallel
when followed by a parameter from <{1..12|1..15}>.
To erase the current setting, omit the parameter.
get Returns the current number of channels dialed in
parallel.
{1..12|1..15} Range of numbers of PRI channels that can be dialed in
parallel. For PRI T1, the range is 1..12. For PRI E1, the
range is 1..15.
Example
pridialchannels set 3
User Interface Screen Location
System Info > Admin Setup > Video Network > IMUX > Advanced Dialing
Note This screen is only accessible if you have a PRI network interface
connected to your system.
www.polycom.com/videodocumentation