Ipaddress - Polycom ViewStation EX Api Manual

API Guide for ViewStation EX, ViewStation FX, and VS4000

ipaddress

112
Description
This command sets or gets the LAN IP address of the system. Use this
command when you need to allocate a static IP address to your system. After
a change is made, the system prompts you for a restart.
Note This setting can only be changed when DHCP is off.
Syntax
ipaddress <set|get> ["ipaddress"]
Parameter Definition
set Sets the LAN IP address when followed by the
"ipaddress" parameter.
To erase the current setting, omit "ipaddress" .
Note: This setting can only be changed when DHCP is
off.
get Returns the current setting for this option.
"ipaddress" IP address of the system.
Example
ipaddress set 192.168.1.111
User Interface Screen Location
System Info > Admin Setup > LAN/H.323 > LAN/Intranet > LAN & Intranet:
IP Address
www.polycom.com/videodocumentation