Netstats - Polycom ViewStation EX Api Manual

API Guide for ViewStation EX, ViewStation FX, and VS4000

netstats

136
Description
This command is used to get network statistics for endpoints in a multipoint
call.
Syntax
netstats [{0..2}]
Parameter Definition
{0..2} Specifies the endpoint in a multipoint call, where 0 is
the first endpoint connected.
For information about the near site, omit the parameter.
Examples
netstats
netstats 2
return information similar to this:
call:1 txrate:128k rxrate:128k pktloss:0 %pktloss:0.00%
tvp:H.263+FIT rvp:H.263+FIT tvf:CIF rvp:CIF tap:G.728
rap:G.728 tcp:H.323 rcp:H.323
where:
txrate transmit clock rate
rxrate receive clock rate
pktloss number of packet loss/errors
%pktloss percentage of packet loss/errors
tvp transmit video protocol
rvp receive video protocol
tvf transmit video format
rvf receive video format
tap transmit audio protocol
rap receive audio protocol
tcp transmit comm protocol
rcp receive comm protocol
User Interface Screen Location
System Info > Diagnostics > Network Stats
www.polycom.com/videodocumentation