Slides - Polycom ViewStation EX Api Manual

API Guide for ViewStation EX, ViewStation FX, and VS4000

slides

170
Description
This command and its subcommands let you select and control a slide
presentation. To use the slides subcommands, you must first load the slide
presentation via the web browser. For information about loading a slide
presentation using the web browser, refer to the Getting Started Guide for
ViewStation EX, FX, and VS4000.
Syntax
slides<thumbnails|next|previous|first|last|resend|list|select|
password|start|register|unregister>
slides select <"presentation">
Parameter Definition
thumbnails Shows the slide thumbnail page.
next Selects the next slide in the presentation.
previous Selects the previous slide in the presentation.
first Selects the first slide in the presentation.
last Selects the last slide in the presentation.
resend Resends the last slide.
list List all loaded presentations (displays names and IP
addresses) available for viewing. The names are the
names of the PCs from which the presentations are
loaded.
select Selects slide presentation from the list by name.
"presentation" "presentation" is generally the name of your computer
on the network. This name appears in the pcPresent
"Enter your Name" field.
password Enters the presentation password.
start Returns the first slide.
register Registers the shell session to receive notifications about
slides that are sent or received.
unregister Unregisters the shell session.
Example
slides select presPC
www.polycom.com/videodocumentation