Streamrouterhops - Polycom ViewStation EX Api Manual

API Guide for ViewStation EX, ViewStation FX, and VS4000

streamrouterhops

188
Description
This command sets or gets the number of routers you want the streaming
video to pass through. This allows you to control who can see your streaming
video.
Syntax
streamrouterhops <set|get> ["number router hops"]
Parameter Definition
set Sets the number of routers when followed by the
"number router hops" parameter.
To erase the current setting, omit the parameter.
get Returns the current setting.
"number router Numeric value. Number of routers the streaming video
hops" has to pass through.
Example
streamrouterhops set 1
User Interface Screen Location
System Info > Admin Setup > LAN/H.323 > Streaming: Number of Router
Hops
www.polycom.com/videodocumentation