Repeat - Polycom ViewStation EX Api Manual

repeat

© Polycom, Inc.
Description
This command allows you to repeat a specified command from the history
list. For more information about the history list, refer to the command
on page 110.
Syntax
repeat <{1..n}>
Parameter Definition
{1..n} Repeats the specified command in the history list.
Values larger than the number of commands in the
history list are not valid. The history list may contain up
to 64 commands.
Examples
The following is a sample history list containing command entries:
1 dynamicbandwidth get
2 get screen
3 language get
4 ipdialspeed set 128 on
5 lanstat min 1
Consequently, the command:
repeat 4
will repeat command the fourth command, which in the preceding history list
is ipdialspeed set 128 on .
System Commands
history
157