Isdndialspeed - Polycom ViewStation EX Api Manual

isdndialspeed

© Polycom, Inc.
Description
This command enables or disables the valid dialing speed of the ISDN
network interface.
Syntax
isdndialspeed <set|get> <"valid speed"> <on|off>
Parameter Definition
set Sets the command. The parameters "valid speed" and
on or off are required.
get Returns the current setting for this option (on or off).
"valid speed" Valid speeds are: 56, 2x56, 112, 168, 224, 280, 336, 392,
64, 8x56, 2x64, 128, 192, 256, 320, 384, 7x64, 512, 560,
576, 616, 640, 672, 704, 728, 768, 784, 832, 840, 14x64,
952, 960, 1008, 1024, 1064, 1088, 1120, 1152, 1176, 1216,
1232, 1280, 1288, 21x64, 1400, 1408, 1456, 1472, 1512,
1536, 1568, 1600, 1624, 1664, 1680, 1728, 28x64, 1856,
and 1920.
Note: The highest speed for BRI systems is 512. The
highest speed for T1 systems is 1472, and the highest
speed for E1 is 1920.
on Enables the specified speed valid speed.
off Disables the specified speed valid speed.
Example
isdndialspeed set 256 on
User Interface Screen Location
System Info > Admin Setup > Video Network > IMUX > Dialing Speeds
Note This screen is only accessible if you have a Quad BRI, PRI, or V.35
network interface connected to your system.
ISDN Commands
241