Ipaddress - Polycom HDX 9006 Integrator's Manual

Integrator's Reference Manual for Polycom HDX Systems

ipaddress

Sets or gets the LAN IP address (IPv4) of the system.
Syntax
ipaddress get
ipaddress set "xxx.xxx.xxx.xxx"
Parameter
get
set
"xxx.xxx.xxx.xxx"
Feedback Examples
● ipaddress set 192.168.1.101
returns
ipaddress 192.168.1.101
● ipaddress get
returns
ipaddress 192.168.1.101
Comments
Use this command when you need to allocate a static IP address to your system. After making a change,
you must restart the system for the setting to take effect.
User interface screen location: System > Admin Settings > LAN Properties: Use the Following IP
Address
Polycom, Inc.
Description
Returns the current setting.
Sets the LAN IP address to the "xxx.xxx.xxx.xxx"
parameter. This setting can only be changed when
DHCP is off.
IP address of the system.
System Commands
305