Ipaddress - Polycom RealPresence Group Series Reference Manual

ipaddress

Gets or sets the LAN IP address (IPv4) of the system.
Syntax
ipaddress get
ipaddress set "xxx.xxx.xxx.xxx"
Parameter
get
set
"xxx.xxx.xxx.xxx"
Feedback Examples
● ipaddress set 192.168.1.101
returns
ipaddress 192.168.1.101
● ipaddress get
returns
ipaddress 192.168.1.101
Limitations
None
Comments
Use this command when you need to allocate a static IP address to your system.
After making a change, you must restart the system for the setting to take effect.
Polycom, Inc.
Description
Returns the current setting.
Sets the LAN IP address to the
"xxx.xxx.xxx.xxx" parameter. This
setting can only be changed when DHCP
is off.
IP address of the system.
System Commands
User
Accessible Additional Restrictions
✓
260