Disassembling And Assembling Evaporator Housing - Audi A3 1997 Manual

Audi A3 1997 ➤
Heating, Air Conditioner - Edition 06.2000
Fig.3 -> Installing gasket on evaporator housing
Note:
Seal -A- must be fitted in the groove all around the evaporator housing.

12.2 - Disassembling and assembling evaporator housing

- Dismantling and assembling air conditioner => Page
1 Air flow flap
2 Lever
3 Bolt
4 Temperature sensor for fresh air intake duct -G89
◆ Removing and installing =>Page
5 Bolt
6 Air flow flap positioning motor -V71
◆ Actuates the air flow flap and fresh/recirculated air flap
218
87 - Air conditioning
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
213
185 .
.