Controls, Housing; Specifications; Fastener Tightening Specifications - Audi Q7 2007 Repair Manual

Transfer Case 0BU, Front Final Drive 0BM, 0C1 and 0BN, Rear Final Drive 0BP - Edition 12.2012
34 –

Controls, Housing

1

Specifications

⇒ "1.1 Fastener Tightening Specifications", page 9
1.1

Fastener Tightening Specifications

Component
1,2
Balance weight
1,3
Balance weight
Bracket to transfer case
1
Transfer case
1
Transmission carrier
Transmission fluid filler plug on the transfer case
•
1
Replace
•
2
For bolt tightening clarification, refer to
•
3
For bolt tightening clarification, refer to
• 4
For bolt tightening clarification, refer to
⇒ "3.1 Transmission Carrier and Console Overview", page 17
•
5
Insert the transmission fluid filler plug using Locking Fluid - AMV 185 101 A1-
4
⇒ "2.1 Transfer Case Overview", page 10
⇒ "2.1 Transfer Case Overview", page 10
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
5
and see items -4, 5 and 6-
Audi Q7 2007 ➤
Bolt Size Nm
- 32
- 50
- 20
-
50 + 90°
- 20 + 90°
- 50 + 90°
- 20
and see item -10-
and see item -11-
1. Specifications
1
9