Audi A3 1997 Manual page 36

Audi A3 1997 ➤
Heating, Air Conditioner - Edition 06.2000
Rapid data transfer
Select function XX
- Press keys -0- and -7- (07 selects the "Encoding control unit" function.)
-> Indicated on display:
Rapid data transfer
07 - Encoding control unit
- Press Q to confirm entry.
-> The following appears on the display:
Encoding control unit
Enter code number XXXXX
Note:
Next position can be selected by pressing the ⇒ key.
Different codes:
◆ Codes for operating and display unit -E87 with the following indices:
- Indices "H", "J, "K" or "L"
- and from index "O" onwards
Code
0
0
1
0
1
2
4
0
1
3
4
Examples of code
00040 4-cylinder Left-hand drive petrol engine without
map-controlled cooling for rest of the world
01040 4-cylinder Left-hand drive petrol engine with
map-controlled cooling for rest of the world
- Encode operating and display unit -E87 according to the vehicle type, engine and country.
- Press Q to confirm entry.
- Perform basic setting =>Page
Notes:
◆ If a wrong coding was entered into the operating and display unit -E87 it will be suppressed. The fault "coding
XXXXX not accepted" is displayed and the old coding remains intact.
◆ If an operating and display unit -E87 is newly installed (out of spare part programme) it is coded with "00001".
30
01 - Self-diagnosis, Electrical check
HELP
Q
Vehicle without map-controlled cooling
Vehicle with map-controlled cooling
Rest of the world (ROW) except for USA and Japan
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
24 .
Meaning
No assignment
Type of engine cooling
Country (export version)
USA
Japan
Engine version
4-cylinder
Vehicle/engine type
LHD/petrol engine
RHD/petrol engine
LHD/diesel engine
RHD/diesel engine