Note:
The sender for centre vent temperature -G191 is only present in vehicles with map-controlled engine cooling
(at the moment only with 1.6 litre engine with gradual introduction into model year 1999).
=> Relevant Workshop Manual Injection and Ignition system
20 Positioning motor for central flap
-V70 *
◆ With potentiometer -G112
◆ Removing and installing =>Page
◆ "Green" pivot arm
21 Footwell vent
◆ Removing and installing => Page
Heating, Air Conditioner - Edition 06.2000
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
182
.
181
.
6.1 - Components for air conditioner control and regulation (in the passenger
Audi A3 1997 ➤
173
compartment)